Micromeritics TriStar II 3020 - 3 The Analysis Sequence

TriStar II 3020 Service Analysis Sequence
Jul 09 3-1
3. THE ANALYSIS SEQUENCE
The analysis sequence describes what is taking place throughout the instrument during an analysis.The
instrument schematic, shown below, will be used to show the state of the system components during the
various phases of an analysis.
The state of a valve is indicated by the icon color.
10 mmHg transducer (Displays only if the Krypton option is installed.)
Sample
Sample tubes
Elevator
Gas
inlet
ports
1000 mmHg
transducer
Temperature
Po tube
transducers
Green = open
White = closed
(when in Manual Mode, yellow = closed)