Micromeritics TriStar II 3020 - New Product Features; Cabinetry & Sample Chamber; Interior Modules; Software

New Product Features TriStar II 3020Service
2-2 Jul 09
New Product Features
Cabinetry & Sample Chamber
• The TriStar II 3020 is smaller than the TriStar 3000 due to elimination of the vacuum
pump cavity.
• The vacuum pump is now located external to the cabinet.
• The rotating door allows easier access to the sample ports for mounting and removing
sample tubes.
Interior Modules
• Solid-state transducers with stainless steel diaphragms replace the exposed-silicon
transducers of the 3000 model.The TriStar II 3020 adds a continuous saturation pressure
measurement feature.
• An additional port has been added to the gas inlet manifold to bring the total number of
ports, for readily available gases, to four.
Software
• The use of any of the IUPAC standard measurement units is available on the TriStar II
3020.
• Data from the TriStar 3000 and Gemini can be imported to the 3020 to allow overlay plots
and other comparisons to be generated.
• Information can be scanned directly into input fields using a bar code reader. This elimi-
nates human error on data entry.
• The TriStar II 3020 software allows opening of multiple sample files simultaneously for
editing.
• Diagnostics may be performed remotely by way of the Internet. This allows MIC engi-
neers to access the instrument and run diagnostics programs.