• Use a Wi-Fi connection to connect to the
internet, rather than a cellular data
connection.
• Stop your phone scanning for available
wireless networks. Swipe down from the top
of the screen, tap and hold Wi-Fi, and
switch Wi-Fi networking to Off .
• If you're listening to music or otherwise using
your phone, but don't want to make or
receive calls, turn Airplane mode on. Swipe
down from the top of the screen, tap All
settings > Network & wireless >
Airplane mode, and switch Status to On
.
Check battery use
To check which apps have been eating up your battery life, swipe down from the top of the
screen, and tap All settings > System > Battery saver > Battery use.
Save on data roaming costs
You can cut data roaming costs and save on your phone bills by changing cellular data settings.
To use the optimal connection method, change the Wi-Fi, cellular data, and email download
settings.
Data roaming means using your phone to receive data over networks that your network
service provider doesn't own or operate. Connecting to the internet when roaming, especially
when abroad, can raise data costs substantially.
Using a Wi-Fi connection is generally faster and less expensive than using a cellular data
connection. If both Wi-Fi and cellular data connections are available, your phone uses the Wi-
Fi connection.
Connect to a Wi-Fi network
1. Swipe down from the top of the screen, and tap and hold Wi-Fi.
2. Make sure Wi-Fi networking is switched to On .
3. Select the connection you want to use.
Close the cellular data connection
Swipe down from the top of the screen, tap All settings > Network & wireless >
Cellular & SIM, and switch Data connection to Off .
Tip: To follow your data usage, tap All settings > Network & wireless > Data
usage.
© 2015 Microsoft Mobile. All rights reserved.
47
To Next Page
Loading...
Need help?
General
