4. Specification
5. Feature and function of the wired controller
6. Reattach the upper part of the wired controller
After adjusting the upper case and then buckle the
upper case; avoid clamping the wiring during installation.
(Fig 3-13)
Wiring specifications
Feature:
Function:
LCD display.
Malfunction code display: it can display
the error code, helpful for service.
4-way wire layout design, no raised
part at backside, more convenient
to place the wires and install the device.
Room temperature display.
Weekly Timer.
Mode: Choose Auto-
Cool-Dry- Heat -Fan
Fan speed: Auto/Low/
Med/High speed
Swing(on some models)
Timer ON/OFF
Temp setting
Weekly timer
Follow me
Turbo
24-hour System
12-hour System
43
NOTE: Suggested to use the connective wire of 6 meters length.
Fig 3-13
All the pictures in this manual are for
explanation purpose only.
Your wire controller may be slightly
different .The actual shape shall prevail.
Input voltage
Ambient temperature
Ambient humidity
12V
0~43°C(32~110°F)
Ambient humidity
Auto-restart
Individual louver control
(on some models)
Automatic airflow test
Rotation&Back-up
Dual Control
Group Control
Child Lock
LCD display
Clock
To Next Page
Loading...
