NOTE: Company will not be liable for any issues and problems caused by Internet, Wi-Fi Router and Smart
Devices.
Please contact the original provider to get further help.
On an app market (Google Play Store, Apple App Store), search for "MSmartHome" and find the
MSmartHome app. Download and install it on your phone, You can also download the app by scanning the
QR code below.
DOWNLOAD AND INSTALL APP
NETWORK CONFIGURATION
How to enter AP distribution network
CAUTION
•
Please Check The Service Website For More Information.
CAUTION
•
It is necessary to forget any other around network and make sure the Android or IOS device just connect
to the Wireless Network you want to configure.
Press the FUNC. button until the icon is selected and then press the CONFIRM buttton. AP mode is
activiated if the icon is blinked.
•
Make sure the Android or IOS device Wireless Network function works well and can be connected back
to your original Wireless Network network automatically.
•
Smart Phone camera needs to be 5 million pixels or above to make sure scan QR code well.
•
Due to different network situation, sometimes, request time-out could happen, thus, it is necessary to
do network confguration again.
•
Due to different network situation, control process may return time-out sometimes. If this situation occurs,
the display between board and App may not be the same, please do not feel confused.
•
Please ensure your mobile device is connected to Wireless Network router.
Also, the Wireless Network router has already connected to Internet before
doing user registration and network configuration.
•
Make sure your mobile device has already been connected to the Wireless Network which you want to use.
Also, you need to forget other irrelative Wireless Network in case it influences your cofiguration process.
Download the app
& activate product
MSmartHome
58
To Next Page
Loading...
