8. Preparatory operation
9. Operation
Set the current day and time
To start/stop operation
8 degree heating function (on some models)
45
NOTE: For some models, the 8° heating function can only be set by remote control, you can not choose
this function by wired controller.
Press the Timer button for 2 seconds or more.
The timer display will flash.
Press the button “ ” or “ ” to set the date.
The selected date will flash.
The date setting is finished and the time setting is prepared after pressing
Timer button or CONFIRM button or there is no pressing button in 10 seconds.
Press the button “ ” or “ ” to set the current time.
Press repeatedly to adjust the current time in 1-minute increments.
Press and hold to adjust the current time continuous.
The setting is done after pressing CONFIRM button or there is no pressing
button in 10 seconds.
Press the Power button.
When the heating mode is 10°C(50°F )/16°C(60°F)/17°C (62°F )/20°C( 68°F ),
press the down button twice within 1 second to turn on the 8 ° heating function,
and press the Power, Mode, adjust , Fan speed, Timer, and Swing button to
cancel the 8° heating function.
Time scale selection
Press the buttons “ ” and “ ” for 2 seconds will alternate the clock time
display between the 12h & 24h scale.
5
1
2
3
4
ex.Monday 11:20
6
To Next Page
Loading...
