Midea E60MEW0A09

- - 15
射灯从前板中压出来完成射灯拆卸
Press the spotlight out of front plate, complete spotlight dismantling
若是白炽灯，则直接旋转白炽灯泡，将灯取下，如下图：
If incandescent lamp involved, rotate the incandescent bulb directly, take down the lamp, as the below
picture.
6.5 开关拆卸 Switch Dismantling
工具： 十字螺丝刀 Tool: Cross screwdriver
步骤 1：如上 6.3 将前板拆卸出来，把电子开关接线端子拔出来，如图。
Step 1: as above 6.3 dismantle the front plate, pull out the electronic switch terminal, as shown in the
picture.