- - 21
步骤 1：如 6.4 和 6.5 将接线板上的各个端子拔出来，如图。
Step 1: as above 6.4 and 6.5, pull out all terminals on terminal block, as shown in the picture.
步骤 2：用十字螺丝刀将固定接线板的四颗小螺丝（如上图红箭头）拧下来，完成接线板的拆卸。
Step 2: twist off the four small screws fixing terminal block with cross screwdriver (as the above red arrow)
to complete terminal block dismantling
7. 故障排除 Troubleshooting
7.1 电器不良现象 Electrical Appliance Faults
To Next Page
Loading...
