3.TROUBLESHOOTING
The machine stops when the
procedure has not been finished
Power failure or water cut.
The drainage pump has noise during
the operation when the water has
just been drained
To stop for some time during the
wash procedure
service centre.
If you cannot solve the above abnormal situations, would you please contact the nearest
The washing machine adds water automatically.
Because there is too much bubble in the tube, the
washing machine is cleaning the bubble.
SolutionDescription
The inner barrel water of the washing machine has
been drained but there is still a small amount of
water in the drainage pump and pipe. The drainage
pump continuously operates and takes in the air, and
at this time there is the noise, which is normal
situation.
P.08
To Next Page
Loading...
Need help?
General
