Midea l712wmb16 User Manual

3.TROUBLESHOOTING
P.09
Before entering into service mode, make sure no water remains in the inner drum, if not, select drain
only program to drain them out.
Turn on the machine and in 30s.
Press or to select test program. Press button to confirm your selection
and start the selected test. If you want to go back to test selection interface, press the button to
cancel previous selection.
3.2.1 Version switchover (t01)
1) Enter into service mode, LED displays “t01”
2) Press button, LED displays “0xx”.x means current version.
3) Press to confirm switchover.
4) Press or to change version.
5) Press button continuously for 3s to confirm your change.
6) Press button to close all output and exit this program. LED displays “t01”.
3.2.2 Error code checking (t02)
1) Enter into error code mode, LED displays “Err”. Press button and LED displays
EXX(x=1,2,3….)
2) Press to show the last code and press to show the next code. The latest 10 error codes
can be found in system, and same error code is recorded one time even if it occurs more than one time
3) If no error information found, LED shows E00.
4) Press and button at the same time continuously for 3s, after hearing the beep, all the
error codes records deleted, LED displays E00.
5) Press button to exit, LED display t02.
3.2.3 Version information checking (t03)
Version information checking is used to show the current version information stored in nonvolatile
memory applications.
1) Enter into service mode, LED displays “cod”.
3) Press button, LED displays version number.
4) Press to go back to version information checking status, LED display “t03”.
3.2.4 UI Checking (t04)
1) Press button to illuminate the whole LED display.
2) Press button, the whole LED display flashes.
3) Press to stop flash, LED display “t04”
take turns [K2] [K4] [K2] [K4] buttons
[K2] [K3] [K5]
[K5]
[K5]
[K4]
[K2] [K3]
[K4]
[K5]
[K5]
[K2] [K3]
[K2] [K3]
[K5]
[K5]
[K2]
[K5]
[K5]
[K5]
[K5]
2) Press , LED displays project number.
3.2 Sevice mode
Start/Pause
K1 K2
K3
K4
K5

Midea l712wmb16 Specifications

General

Brand	Midea
Model	l712wmb16
Category	Washer
Language	English