9
Safety
Precautions
Installation
Requirements
Installation
Instructions
PRODUCT DIMENSIONS
DRAIN REQUIREMENTS
Follow local codes and ordinances.
DRAIN HOSE
If the supplied hose is not long enough, use a new drain hose with a
maximum length of 6 ft (3.05 m) that meets all current AHAM/
IAPMO test standards.
The drain hose should:
• Be resistant to heat and detergent
• Have an inside diameter (I.D.) of " (1.58 cm)
• Include a coupler to connect the two hose ends (secure the connection
with two clamps)
Do NO
T c
onnect dr
ain hoses fr
om other applianc
es t
o the dish
washer
drain hose.
Drain Hose Routing
The drain hose may pass through the same hole as the wiring and hot
water line, or you can cut an additional 1
" (3.8 cm) diameter hole in the
cabinet wall to admit the drain hose.
NOTE:
The hole must be smooth with no sharp edges.
or 3/4" (1.9cm) or 1''(2.54cm)
22.68"
(57.6 cm)
23.57"
(59.86 cm)
33.66"
(85.5cm)
18.66"
(47 4cm)
.
3.8"
(9.7 cm)
To Next Page
Loading...
