7
Safety
Precautions
Installation
Requirements
Installation
Instructions
Tools Needed
Tubing Cutter Hole Saw Set Drill and Bits
Wire Stripper
LOCATION REQUIREMENTS
IMPORTANT:
•
Do not run drain lines, water lines or electrical wiring where the
y can
interfere with or contact dishwasher motors or legs.
•
The location where the dishwasher will be ins
talled must provide
clearance between motors and flooring. Mo ors should not touch the
floo .
•
The opening must have a lev
el floo . (If floor t front of opening is
not level with floor t rear of opening, shims may be needed to level
dishwasher).
•
Do not install dishwasher over carpet
ed flooring
•
The dishwasher must be fully enclosed on the top
, sides and back and
must not support any part of the enclosure.
•
The dishwasher must be installed so tha
t the drain hose is no more
than 10 ft in length for proper drainage.
KEY CONNECTION POINTS
Front
a
b
a
Water Connection
b
Electrical Junction Box
To Next Page
Loading...
Need help?
General
