11
Safety
Precautions
Installation
Requirements
Installation
Instructions
Grounding Instructions:
•
The dishwasher must be connect
ed to a grounded metal, permanent
wiring system, or an equipment grounding conductor must be run with
the circuit conductors and be connected to the equipment grounding
terminal or lead on the dishwasher.
Power Cord Connections:
•
Use a power cord with connections tha
t comply with the National
Electrical Code, Section 422 and/or local codes and ordinances.
•
Recommended cord length is 54" min. and 64" max.
•
A power cord kit #BK500 is av
ailable for purchase from an authorized
parts dealer.
Direct Wire Connections:
•
Use fl xible, armored or nonmetallic sheathed, copper wir
e with
grounding wire that meets the wiring requirements for your local
codes and ordinances.
INSTALLATION INSTRUCTIONS
IMPORTANT:
•
This appliance should be installed only by a qualified In taller
, plumber
or technician and in accordance with the manufacturer’s installation
instructions, electrical and plumbing national and local codes and
ordinances.
•
The dishwasher must be installed t
o allow for future removal from the
enclosure if service is required.
•
Each dishwasher is tested a
t the factory and may contain some
residual water in the tub as a result of the test.
Step 1. UNPACK DISHWASHER
IMPORTANT: If you received a damaged dishwasher, you
should immediately contact Midea Customer Service.
WARNING
Suffocation Hazard
•
To avoid danger of suffocation, k
eep plastic bag and
other packing material away from babies and children.
Do not use this bag in cribs, carriages and playpens.
The plastic bag could block nose and mouth and
prevent breathing. This bag is not a toy.
•
Failure to follow these ins
tructions can result in death or
brain damage.
To Next Page
Loading...
Need help?
General
