Botton Function Description
6
1.Turn on the power, the buzzer will sound, the LED and the nixie tube will be on
for about 1s, enter the standby mode, and display the current water temperature;
- if it is necessary to Start to boiling, skip to step 2);
- if it is necessary to Start to the set temperature and keep it warm, skip to step
3);
How to use
Product Menu
For the first time to use or no use for a long time, it is recommended that you
fill to the maximum level mark with fresh tap water, boil and empty the kettle
at least 2 times to clear kettle of any tiny particles. Do not drink such water.
1. Press the lid lock on the handle, and you can open it.
2. Remove the kettle from the base to the filling place. Fill the kettle with
desired amount (no less than the minimum and no more than the maxi-
mum.) Put ba
ck the lid; place the kettle back on the base unit.
3. Connect the plug into a power outlet (220-240V, AC), switch the kettle on
by pressing the switch. The light will illuminate to indicate the kettle is
heating.
4. The kettle will automatically switch off once the water has boiled and the
neon light goes off.
5. Lift the kettle from the base, and you can pour out the water into contain-
er.
1# Setting temperature
#2 Start/Cancel
To Next Page
Loading...
Need help?
General
