To Next Page

To Previous Page

Product Function Description

Special Function Description

Memory function:

● In the process of heat preservation, lift the pot for 3 minutes (± 1min) and put it

back, and the water temperature after putting the kettle + 8 is greater than or

equal to the water temperature before lifting the kettle, then continue to maintain

and the red indicator light for boiling water and the green indicator light for setting

temperature are on;

● When the water is boiling, the red indicator light for boiling water will be off, the

green indicator for setting temperature will continue to be on, and the buzzer will

give three sounds to enter the heat preservation function mode;

● In the working process and heat preservation mode, click the setting tempera-

ture key to re select and set the setting temperature temperature (the first click

will display the current setting temperature temperature temperature); if the

working process is currently in the setting temperature function file, restart the

working process; if the current heating mode is in the setting temperature func-

tion file, directly start the heat preservation.

● Start the heat preservation timer when entering the insulation mode;

● When the holding time is over, it will enter the shutdown mode automatically.

Setting temperature:

● In the shutdown mode, click the "setting temperature" button to enter the

standby mode.

● In standby mode, first click the "setting temperature" cycle to select the

required heat preservation temperature, the setting temperature green indicator

light is on, and then the digital tube is normally on to display the set temperature

for 1 second, and then flash to display the set temperature for 2 seconds; then

the buzzer will sound twice to enter the function of directly boiling water to the set

temperature for heat preservation;

● When boiling water to the holding temperature, the digital tube displays the

real-time temperature, and the setting temperature green indicator light is on;

When the working is finished after boiling water to the set temperature, the

buzzer will prompt 3 times, and the setting temperature green indicator will

continue to be on; it will automatically enter the heat preservation mode;

● In the working process and heat preservation mode, click the setting tempera-

ture key to re select and set the setting temperature (the first click will display the

current setting temperature); if the working process is currently in the setting

temperature function file, restart the working process; if the current heating mode

is in the setting temperature function file, directly start the heat preservation (that

is, the water will no longer be boiled to boiling).

● Start the heat preservation timer when entering the insulation mode;

● When the holding time is over, it will enter the shutdown mode automatically.

Midea MK-HE1533 User Manual

Questions and Answers: