EasyManua.ls Logo

Midea MTB1T-96CWN1

Midea MTB1T-96CWN1
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Midea R410A T3 50Hz Top-discharge Series MCAC-UTSM-201707
99
2.2 Wired controller outlook
KJR-29B/BK-E, KJR-29B1/BK-E, KJR-29C/BK-E,
KJR-29C1/BK-E
KJR-29A/BK-E, KJR-29A1/BK-E
2.3 Operation instructions
1) Remote signal receiving function:
the wired controller can be a remote signal receiving device, it is possible to use the wireless
remote controller to control the air conditioner through the wired controller when the system have
been powered on.
Note: The wired controller will not receive the swing controlling instruction. For the indoor unit with
swinging function, you can directly use the wireless remote controller to control swinging through the
display panel of the indoor unit, or use the swing button on the wired remote controller to control the
indoor unit for swinging.
2) On and off the air-conditioner:
Press the On/Off button to control the indoor unit on and off status.
When the unit is turned off, press the On/Off button, the unit will be turned on and the
operating icon lights up.
When the unit is turned on, press the On/Off button, the unit will be turned off and the
operating icon lights off.
3) Set the operating mode
Press the mode button to set the operating mode, after each button press the operating
mode will circle as follow:

Related product manuals