EasyManuals Logo
Home>Midea>Electric Pressure Cooker>MY-CS6019WP

Midea MY-CS6019WP User Manual

Midea MY-CS6019WP
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
24
Troubleshooting
Food debris attached to the
sealing ring
Sealing ring damaged
The lid is not closed correctly
Float valve gasket worn-out
Too little food and water in inner
pot
Steam leaks from the lid or
exhaust valve
Exhaust valve not in sealing
position
High temperature since there isn’t
water in the inner pot
High temperature since there isn’t
water in the inner pot
Turn the exhaust valve to the
sealing position
Add water and food according
to the recipe
Food debris on the float valve
gasket
Clean the sealing ring
Replace the sealing ring
Close the lid correctly
Clean the float valve gasket
Replace the float valve gasket
Send to the service center for
repair
Send to the service center for
repair
Send to the service center for
repair
Add water according to the
requirement
Send to the service center for
repair
After cooking cycle completes,
leave the lid on for 5 more
minutes.
Reduce water accordingly
Pressure control fails
Power socket bad contact
Bottom sensor fault
Pressure switch fault
Too little water
Lid opened prematurely
Too much water
Add water accordingly
Please check the power socket
Rice too soft
All indicators flash
Difficult to close the lid
Sealing ring not installed properly Position the sealing ring well
The floater valve clamps the push
rod
Float valve in the popped-up
position
Press the float valve lightly with
a chopstick.
Pressure exists inside the cooker
Lightly push the push rod
Difficult to open the lid
Steam leaks from the lid
Steam leaks from float
valve
Float valve unable to rise
Display screen
displays C1
Display screen
displays E1
Display screen
displays E2
Display screen
displays E8
Power indicator doesn’t
light on
Rice half cooked or too
hard
Steam comes out from
exhaust valve non-stop
Problem Reason Solution
Sealing ring installed improperly
Install the sealing ring as
required
Open the lid after the pressure
is completely released.
S/N
Put the inner pot correctly
—— If the fault is not removed after above check, please contact our authorized
service center for repair.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea MY-CS6019WP and is the answer not in the manual?

Midea MY-CS6019WP Specifications

General IconGeneral
BrandMidea
ModelMY-CS6019WP
CategoryElectric Pressure Cooker
LanguageEnglish

Related product manuals