© Midmark Corporation 2020
English - 35
TP202 20-42-FO-00014 Rev A1 C2169
003-1879-99
WARNING
Do not modify this equipment without authorization
of the manufacturer.
WARNING
Equipment not suitable for use in the presence of a ammable anesthetic mixture.
WARNING
To avoid the risk of electric shock, this equipment must ONLY
be connected to supply mains with protective earth.
Electrical (See Regulatory Compliance Chart - Next Page)
Fuse (Scaler Transformer) T0.8AL, 250V, 3AG
Circuit Breakers (2) 115VAC 6A 250V, Push to Reset
Circuit Breakers (2) 250VAC 3A 250V, Push to Reset
Power Cord (115VAC) 15A/125VAC x 10 ft. Hospital Grade
Power Cord (230VAC) 10A/250VAC x 2.5 meters
Handpiece
Connection Type Midwest 4-Hole Type Handpiece
Specifications continued...
WARNING
The Acteon Newtron® LED scaler complies with current
electromagnetic compatibility standards. However, it must not
be used by or on those with cardiac stimulators or other active implants
unless adequate electromagnetic interference shielding is present.
Check with a cardiologist to verify the EMI shielding capabilities of the
implant. See enclosed Newtron® LED manual for further advisories.
To Next Page
Loading...