Settings
64
The factory setting is shown in bold.
Programme Status Available settings
P1 S0
S1
Factory default settings reinstated
P2 Demo mode S0
S1
Off, the steam oven heats up
On, the steam oven does not heat up
P3 Buzzer volume S1
S2
S3
S4
Very quiet
Quiet
Medium
Loud
P4 Water hardness S1
S2
S3
S4
Soft (< 1.5 mmol/l, < 8.4 °dH)
Medium (1.5 - 2.5 mmol/l, 8.4–14 °dH)
–
Hard (> 2.5 mmol/l, > 14 °dH)
P5 Temperature S1
S2
°C
°F
P6 Pre-heat S0
S1
Pre-heating not activated
Pre-heating activated
P7 Keypad tone S0
S1
Off
On
To Next Page
Loading...
