Cleaning and care
72
Remove the water container and take
the insert out.
Empty the water container.
Rinse the water container and the
insert thoroughly.
Fill the water container with 1 litre of
fresh tap water and refit the insert.
Push the water container into the
appliance until it connects.
The flashing symbol will go out and
the symbol will start flashing.
Confirm with OK.
The colon will flash and the symbol
will now light up constantly in the
display. Descaling will now continue.
An audible tone will sound when the
descaling process has been completed.
After descaling
Switch the steam oven off.
Remove, empty and dry the water
container.
Allow the oven compartment to cool
down.
Then dry the oven compartment.
Leave the appliance door open until
the oven interior is completely dry.
To Next Page
Loading...
