Operation
43
Switch the steam oven on.
The main menu will appear.
Distilled or carbonated water or other
liquids could damage the steam
oven.
Only use cold, fresh tap water
(below 20°C).
Fill the water container and push it
into the appliance.
Place the condensate tray on shelf
level 1 when using perforated
containers.
Place the food in the oven.
Select the desired function.
The function will appear first, followed
by the recommended temperature.
Change the recommended
temperature if necessary.
The recommended temperature will be
accepted within a few seconds. You
can change the temperature
subsequently via the arrow buttons.
Confirm with OK.
The actual temperature will appear and
the heating-up phase will commence.
You will see the temperature increasing.
A buzzer will sound when the set
temperature is reached for the first time.
After cooking, select the sensor for
the selected function to end the
cooking programme.
Risk of injury caused by hot
steam.
A great deal of hot steam can escape
when the door is opened. The steam
can cause burns.
Step back and wait until the hot
steam has dissipated.
Take the food out of the oven.
Switch the steam oven off.
To Next Page
Loading...
