Miele DGM 7340 - Disconnecting the Appliance from Mains

Installation
-
I
N
-
S
T
A
L
L
-
A
-
T
I
O
N
-
154
Disconnecting from the mains
 Risk of electric shock from mains
voltage.
There is a risk of electric shock if the
appliance is reconnected to the
mains supply during repair or service
work.
After disconnection, ensure the ap-
pliance cannot be switched back on
by mistake.
To disconnect the appliance from the
mains power supply, do one of the fol-
lowing depending on installation:
Safety fuses
 Completely remove the fuse links
from the screw caps.
Automatic circuit breakers
 Press the test button (red) until the
middle button (black) springs out.
Built-in circuit breakers
 For circuit breakers of at least type B
or C, switch the lever from 1 (on) to 0
(off).
Residual current device (RCD)
 Residual current device: switch the
main switch from 1 (on) to 0 (off) or
press the test button.