Miele DGM 7340 - Selecting a Function or Operating Mode; Entering Numbers

Using the appliance
28
Selecting a function or operat-
ing mode
The sensor controls for the functions
and operating modes (e.g. Further)
are located above the display (see
“Controls” and “Settings”).
 Touch the sensor control for the de-
sired function.
The sensor control on the fascia panel
lights up orange.
 Under Further, scroll through the
lists until the desired menu option is
highlighted.
 Set the values for the cooking pro-
gramme.
 Confirm withOK.
Changing the function
You can change to another function
during a cooking programme.
The sensor control for the previously
selected function lights up orange.
 Touch the sensor control of the new
function or operating mode.
 SelectChange function?| Yes and con-
firm withOK, if required.
The new function appears in the display
with its corresponding recommended
values.
The sensor control for the new function
lights up orange.
Under Further, scroll through the
lists until you reach the desired menu
option.
Entering numbers
Numbers that can be changed are high-
lighted.
 Touch the or arrow buttons or
swipe to the right or left in the
area until the desired number
is highlighted.
Tip: If you press and hold an arrow but-
ton, the numbers continue scrolling
automatically until you release the arrow
button.
 Confirm withOK.
The changed number is now saved.
This will take you back to the previous
menu.