Miele FNS 28463 E bb - Temperature and Door Alarm; Temperature Alarm

Temperature and door alarm
30
The appliance has been fitted with a
warning system which ensures that the
temperature in the freezer cannot rise
unnoticed and to avoid energy being
wasted if the door is left open.
Temperature alarm
If the temperature in the freezer
remains above -18°C for a long
time, check that the frozen food has
not started to defrost. If it has, check
that the food is safe to use and if it
is, then use it as soon as possible or
cook it before freezing it again.
If the temperature in the freezer
becomes too warm,

will light up red
in the temperature display. An alarm will
also sound until the cause of the alarm
is rectified or the alarm is switched off.
The temperature the appliance is set at
determines the temperature the
appliance recognises as being too
warm.
The temperature alarm is only
displayed in the start screen and not
when selecting a setting.
A temperature alarm is displayed
before an existing door alarm.
The temperature alarm occurs, e.g.:
– when the appliance is switched on if
the temperature in the appliance
differs greatly from the set
temperature,
– if a lot of room air enters the freezer
when food is being loaded,
rearranged or taken out,
– when freezing large amounts of food
at once,
– in the event of a power cut,
– if the appliance has a fault.
The alarm will stop and

will go out
as soon as the temperature has
dropped down to the correct level
again.
Switching the temperature alarm off
early and checking the warmest
temperature
If the noise disturbs you, you can
switch the alarm off if you wish. You
can also find out what the warmest
temperature was in the freezer.
 Touch

.
The fault message is confirmed, and the
alarm will stop. The start screen
appears in the display: the warmest
temperature recorded in the freezer will
flash for about 1minute in the display.
Then the temperature display will
change to the current temperature in
the freezer.
You can exit from the flashing
temperature display early:
 Touch the temperature display.
The warmest temperature displayed will
disappear. The display will then revert
to showing the current temperature in
the freezer.