Miele FNS 28463 E bb - Ventilation; Fitting Supplied Wall Spacers

Installation
75
Ventilation
 Risk of fire and damage due to
insufficient ventilation.
If the refrigeration appliance is not
ventilated sufficiently, the
compressor will run more frequently
and for longer periods. This will
result in increased energy
consumption and a higher operating
temperature for the compressor. This
may, in turn, cause damage to the
compressor.
Please ensure that there is adequate
ventilation around the refrigeration
appliance.
It is essential to observe the
ventilation gaps given. The
ventilation gaps must not be covered
or blocked in any way.
Air at the back of the refrigeration
appliance gets warm.
Fitting supplied wall spacers
The wall spacers supplied must be
used in order to achieve declared
energy consumption values and to
prevent the build-up of condensation
at high ambient temperatures. The
appliance depth is increased by
approx. 15mm with the wall spacers
fitted. If the wall spacers are not used,
the functionality of the appliance is not
affected. Energy consumption is only
slightly increased with less distance
between the appliance and the wall.
 Fit the wall spacers onto the back of
the refrigeration appliance on the
bottom left and right.