Electrical connection
73
Do not connect the refrigeration
appliance to a stand-alone inverter such
as those used with an autonomous
energy source, e.g. solar power.
When the refrigeration appliance is
switched on, power surges could result
in a safety switch-off. This could
damage the electronic module. The
refrigeration appliance must not be
used with so-called energy-saving
devices either. These reduce the
amount of energy supplied to the
appliance, causing it to overheat.
Connecting the appliance
Insert the plug connector into the
socket at the back of the refrigeration
appliance.
Make sure that the plug connector has
clicked into position correctly.
Insert the mains plug into the mains
socket and switch on.
The appliance is now connected to the
electricity supply:
will appear on the display.
Follow the steps described in
“Switching on and off – Switching on”.
To Next Page
Loading...
