Installing in a side-by-side combination
82
The following tools are supplied with
the appliance:
The following additional tools are
also required:
Installation
The backs of the appliances must be
kept accessible to complete the
installation.
The freezer or refrigerator with freezer
section must be installed to the left of
the other refrigeration appliance
(when viewed from the front). The
side wall heating in the inner wall of
the freezer or the refrigeration
appliance with freezer section is
designed to prevent the build-up of
condensation between the two
appliances.
Place the two appliances as close as
possible to their final position so that
they can be aligned for any
unevenness in the floor.
Before starting, peel off any
protective foil from the appliance
casing.
To Next Page
Loading...
