Installing in a side-by-side combination
90
Aligning the appliance doors
The appliance door(s) can be height-
adjusted at the lower hinge plates.
Unscrew the set screw a maximum
of one turn using the Allen key
supplied.
Adjust the height of the hinge pin with
the spanner supplied. The
appliance is delivered with the hinge
pin fully screwed in.
– To raise the door: turn it clockwise.
– To lower the door: turn it anti-
clockwise.
Tighten the set screw . The hinge
pin is fastened again.
To Next Page
Loading...
