Switching off the ice/water
dispenser
The appliance must be
disconnected from the mains water
supply a few hours before the ice/
water dispenser is switched off.
^
Open the appliance door.
^
Touch the On/Off sensor for the ice/
water dispenser to highlight it in
white.
Settings mode for the ice/water
dispenser
To access settings mode
^
Touch the 0 sensor to highlight it in
white.
^
At the same time, briefly touch the
lighting sensor (without moving your
finger from the 0 sensor).
^
Leave your finger on the 0 sensor for
another 4 seconds until both sensors
light up yellow.
The colour of the other sensors show
whether the function associated with
that sensor is switched on (yellow) or
switched off (white):
De-misting function
Ice cube separation
Keypad tone
^
Let go of both sensors.
De-misting function
A heater element behind the ice/water
dispenser control panel stops it misting
up.
You can deactivate this function to save
energy.
The appliance is delivered with this
function deactivated.
To activate this function,
^
touch the sensor for chilled water to
highlight it in yellow.
Ice/water dispenser
39
To Next Page
Loading...
