Due to the size and weight of the
appliance, it is essential that
installation is carried out by two
people.
Tools and accessories
required
–
Cordless screwdriver
–
TX screwdriver (e.g. TORX)
–
Hammer drill
–
Drill bits in various sizes, depending
on materials
– Hammer
– Socket wrench with: hexagonal bit
(8 mm)
– Adhesive tape
– Pipe wrench
– Spirit level
– Try-square
To secure the building-in niche to a wall
behind:
–
suitable wall plugs/fixing screws
depending on the type of wall.
–
additional fixing brackets as
necessary
Other
–
Step ladder
–
Sack barrow
–
Wooden beams (min. 75 mm x
100 mm) if required, to prevent
tipping; length depends on width of
building-in niche
–
Wood screws in various sizes
Optional accessories
–
Side-by-side installation kit for side-
by-side installation of two appliances
Installation
69
To Next Page
Loading...
