Stainless steel fronts
Stainless steel fronts and stainless steel
look plinth grilles are available from
your dealer or the Miele Spare Parts
Department.
Weight of the door front
Before fitting the door front, ensure that
the weight of the front does not exceed
the maximum permitted:
Appliance Max.
weight
of door front in kg
F 1472 Vi 65
Fitting a door front which is heavier
than the maximum permitted could
damage the hinges.
Building into a peninsular run
When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Building-in at the end of a run
of units
If one side of the appliance is visible, a
side panel is required.
The side panel must be fixed to the
wall, the floor and any furniture/units
above before the appliance is placed in
the niche.
The size of the side panel must match
that of the furniture panel opposite.
Installation
70
To Next Page
Loading...
