G 8066 WES DOS
These models come standard with a
built-in dispensing pump and a
reservoir for detergent.
The reservoir is located on the inner left
hand side of the service panel and
holds approximately 0.3 gal (1.3 liters).
^ Open the service panel with the
handle.
^
Take the blue cap off the filler spout.
^
Using the supplied funnel fill the
container with detergent.
^
Replace the cap and close the ser
-
vice panel.
Detergent indicator
^ Fill the detergent reservoir when the
slot on the left hand side of the ser-
vice panel shows insufficient
detergent.
Maintenance of the dispensing
systems
Every 12 to 18 months by Miele
Technical Service
^
Replace the DOS module siphon
tubes or for machines with integrated
dispensing systems replace the
dispensing hoses.
,
Take care when handling liquids
such as liquid agents and additives!
These may contain irritant or
corrosive ingredients.
Please follow the manufacturer’s
safety instructions.
Wear protective gloves and
goggles.
Adding detergent
28
To Next Page
