,
All electrical work must be
performed by a qualified person in
accordance with local and national
safety regulations.
The machine is equipped witha6ft.
(1.8 m), 12/4 AWG power cord, and a
NEMA L15-20 plug. It should be
connected to the main power supply
according to national requirements.
^
For technical data see the data plate
or wiring diagram supplied.
The machine must only be operated
with the voltage, frequency and fusing
shown on the data plate.
The data plate is located on the rear of
the machine and behind the service
panel on the upper left side.
^ A damaged power cord must only be
replaced with a genuine Miele cord
by a Miele Service Technician.
Electrical rating:
208Vac, 60Hz, 6.2 kW, 3 ph, 20 A
Convertible to:
208Vac, 60Hz, 6.2 kW, 2 ph, 30 A
The dishwasher can be converted
according to the supplied converting
diagram and wiring diagram.
The wiring diagram is located behind
the operating panel.
The conversion diagram is located
behind the service panel.
^
See also the installation diagram
supplied.
WARNING
THIS APPLIANCE MUST BE
GROUNDED
Grounding the machine
A connection screw with the grounding
symbol (
8) is provided on the back of
the machine for grounding.
Electrical Information
59
To Next Page
