With the aid of the following guide, minor problems can be fixed without a service call.
Repairs should only be carried out by Miele Service in accordance with local
and national safety regulations. Unauthorized repairs could cause personal
injury or machine damage.
Technical faults
Issue Possible fault Solution
Dishwasher does not
start
The door is not properly
closed.
Close the door firmly.
The machine is not
plugged in.
Insert the plug.
The fuse has tripped. Reset the circuit breaker.
Dishwasher stops
during a program
The fuse has tripped. Reset the circuit breaker.
See the data plate for
minimum Ampere.
The door is not properly
closed.
Close the door firmly.
A few minutes after
starting a program, the
p indicator flashes
(fault code F..E
appears in the display)
The water supply is
closed.
Open the water supply.
The water inlet filter is
clogged.
Before fixing the fault:
–
Turn the machine off
with the Z button.
Then:
–
Clean the water inlet
filter, see "Cleaning and
Care".
The waterproof system has
activated.
Call the Miele Technical
Service Department.
The water pressure at the
water inlet is lower that
14.5 psi.
Consult a plumber.
Frequently asked questions
50
To Next Page
