Poor cleaning results
Issue Possible fault Solution
Dishes are not clean The dishes were not
loaded correctly.
Load items so water can
reach all surfaces.
See "Use - Loading the
machine" for more
information.
The program was not
powerful enough.
Select a more powerful
program. See the
"Program Guide".
Not enough detergent
was dispensed.
Use more detergent, see
"Programming special
functions".
The spray arms are
blocked by tall items.
Check if the spray arms
rotate freely. Rearrange
items.
The spray arm jets are
clogged.
Clean the spray arm jets,
see "Cleaning and Care".
The filters are clogged or
not correctly inserted.
The spray arm jets may
also be clogged.
Clean and reseat the
filters and spray arms,
see "Cleaning and Care".
The drain pump or the
non-return valve is
blocked. Wash water will
run back into the wash
cabinet.
Clean the drain pump and
the non-return valve, see
"Cleaning and Care".
Dishes are not dry,
glasses and cutlery are
spotted
The rinse aid setting may
be too low, or the rinse
aid reservoir is empty.
Increase the dosage or
refill the reservoir, see
"Programming special
functions".
Frequently asked questions
52
To Next Page
Loading...
