Flat filter
^ Take the front filter out first, by lifting
it up a little at the front.
^ Remove the rear filter, by lifting it up
a little at the rear.
^ Clean the filters thoroughly under
running water.
^ Reinsert the filters in the reverse
order. Make sure that you reinsert the
filters correctly. Ensure that the filters
sit flat in the base of the wash
cabinet.
Fine filter
^ Remove the flat filters.
^ Turn the fine filter counterclockwise
to remove it from the drain.
^ Spin the propeller of the drain pump
few turns in both directions and feel
for resistance.
^ Clean the filter thoroughly under
running water.
^
Reinsert the fine filter into the drain
and turn it clockwise to secure it.
^
Replace the flat filters in the reverse
order. Ensure that the filters sit flat in
the base of the wash cabinet.
Cleaning and Care
46
To Next Page
Loading...
