~
Observe the installation instructions
in the User Manual and the installation
diagram.
~
Before connecting the appliance,
compare the electrical rating (voltage
and frequency) on the type label with
those of the electrical power supply.
These data must correspond, otherwise
the appliance may be damaged. If in
doubt, ask your local electrician.
~
A damaged appliance may
jeopardize your safety. Immediately
disconnect the appliance and contact
Miele Service.
~
Installation and maintenance work or
repairs must be performed by
authorized technicians only.
Improper installation and maintenance
work or repairs may cause significant
danger to the user, for which the
manufacturer assumes no liability!
~
In the event of damage to the
connecting cable, a special connection
cable must be installed by a technician
authorized by the manufacturer.
~
Initial start-up of the appliance and
maintenance work must be performed
by Miele Service only.
~
Disconnect the appliance from the
electrical power supply during
maintenance work (switch off the
appliance, then unplug it, unscrew the
fuse or switch off the circuit breaker).
~
To ensure safe operation, use the
appliance only after it has been
installed.
~
Never open the appliance housing.
Touching live connections and
changing the electrical or mechanical
setup of the appliance will endanger
you and may result in malfunction of the
appliance.
~
Replace defective components with
original Miele parts only. Only with
those parts does the manufacturer
warrant that they meet the safety
requirements.
~
Do not connect the appliance to the
electric power supply via a multiple
socket or extension cord as they do not
ensure the necessary safety (e.g. risk of
overheating).
Safety Instructions and Warnings
5
To Next Page
Loading...
