Before using for the first time
23
Refilling the salt
When the Salt indicator lights up,
wait until the end of the programme
and then refill the salt reservoir.
Risk of corrosion due to saline
solution.
Saline solution that runs out can
cause corrosion in the wash cabinet
and to the load items.
Each time you remove the salt
reservoir cap, you must run the
65°CQuickPowerWash
programme with the Express
programme option selected without
any load items in the dishwasher.
This will dissolve and remove any
traces of salt from the wash cabinet.
After the salt reservoir has been filled,
the refill reminder may still appear in the
display if the salt concentration has not
yet reached the correct level. It will go
out once the salt concentration has
reached the correct level.
The salt refill indicator will be switched
off if you have programmed the
dishwasher for a water hardness below
0.9mmol/l (5°dH – German scale).
To Next Page
Loading...
Need help?
General
