Problem solving guide
69
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
This section only lists faults that you can remedy yourself. All other faults are
shown in Fault FXX.
Technical problems
Issue Cause and remedy
The dishwasher will not
start.
The door is not closed properly.
Raise the door upwards until the catch engages.
The dishwasher is not plugged in.
Insert the plug and switch on at the socket.
The mains fuse has tripped.
Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse
rating).
If the mains fuse trips again, contact your Miele
dealer.
The dishwasher is not switched on.
Switch the dishwasher on with the button.
The dishwasher stops
during a programme.
The mains fuse has tripped.
Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse
rating).
If the mains fuse trips again, contact your Miele
dealer.
To Next Page
Loading...
Need help?
General
