Operation
44
Display of programme running
time
The duration of the programme selected
appears in hours and minutes in the
display before the programme begins. If
the door is opened during the
programme sequence, the time left until
the end of the programme is displayed.
The displayed duration may vary for the
same programme. It is influenced by,
for example, the temperature of the
incoming water, the reactivation cycle
of the water softener, the detergent type
and the amount of crockery and how
soiled it is.
When a programme is selected for the
first time, the display will show the
average running time for a cold water
connection.
The running times shown in the
“Programme overview” chapter refer to
standard test loads and temperatures.
For each programme sequence, the
control module calculates the
programme running time according to
the temperature of the water taken into
the dishwasher and the size of the load.
Starting the programme
Start the programme by closing the
door.
Risk of scalding due to hot
water.
During operation, water in the
dishwasher may be very hot.
During operation, only open the door
with extreme caution.
To Next Page
Loading...
Need help?
General
