Miele HG07 - Fault Messages

Problem solving guide
70
Fault messages
Issue Cause and remedy
The alarm tone is
sounding.
Fault number 
appears in the time
display.
There may be a technical fault.
 Switch the dishwasher off with the button.
 Switch the dishwasher back on after a few
seconds.
 Select the programme you want to use.
 Close the door.
If the indicator lights flash again, there is a technical
fault.
 Switch the dishwasher off.
 Close the stopcock.
 Call your Miele dealer.
Fault :
The drain pump may
still be running, even
with the door open.
The Waterproof system has reacted.
 Switch the dishwasher off.
 Close the stopcock.
 Call your Miele dealer.
The alarm tone is
sounding.
When the door is open,
all of the programme
selection indicator
lights are flashing.
Fault number 78
appears in the time
display.
Circulation pump fault.
 Switch the dishwasher off.
 Switch the dishwasher back on.
 Select the programme you want to use.
 Close the door.
If the fault message appears again, there is a
technical fault.
 Switch the dishwasher off.
 Close the stopcock.
 Call your Miele dealer.