Problem solving guide
72
Water drainage fault
Issue Cause and remedy
The dishwasher stops
during a programme.
The alarm tone is
sounding.
The / indicator
light is flashing.
Fault number
appears in the time
display.
Before rectifying the problem:
Switch the dishwasher off.
Water drainage fault.
There might be water in the wash cabinet.
Clean the filter combination (see “Cleaning and
care – Cleaning the filters”).
Clean the drain pump (see “Cleaning and care –
Cleaning the drain pump”).
Remove any kinks or loops in the drain hose.
To Next Page
Loading...
