Options
49
After you have activated the timer, all
the displays will switch off after a few
minutes to save energy.
Press the button to switch the time
display back on again for a few
minutes.
Open the door if you need to check
how long the timer has left to run.
The time up until the programme starts
will show counting down in the display
in hours for durations above 10hours,
and in minutes for durations below this.
At the end of the delay period, the
programme selected begins
automatically. The time left will appear
in the time display and theTimer
indicator light will go out.
How the timer time is shown in the
display:
Up to 59minutes:
e.g. 30minutes=:
1hour up to 9hours 30minutes:
e.g. 5hours=:
Over 10hours:
e.g. 15hours=
Starting a programme before the
time for the timer has elapsed:
A programme can be started before the
time for the timer has elapsed.
Proceed as follows:
Open the door.
Switch the dishwasher off with the
button.
Switch the dishwasher on again with
the button.
Select the programme you want.
Start the programme by closing the
door.