Stop and Go
Stop and Go is a feature which reduces
the power of all turned on burners. The
cooktop can be left for a short time
without supervision and the danger of
boilovers.
To activate Stop and Go
^ Press and hold the $ Lock control
until you hear two audible signals in
quick succession. Do not touch the
$ Lock control too long or the Safety
Lock will be activated.
The safety lock indicator will flash. The
power for the activated burners is now
reduced to power level 1. The
respective burner will display 1.
If the automatic turn off function is
programmed for a burner, the time will
be interrupted when activating "Stop
and Go". The time will continue when
"Stop and Go" is deactivated.
To deactivate Stop and Go
^ Press and hold the $ Safety Lock
control until the indicator goes out.
The burners will now operate with the
last selected power level.
Safety features
22
To Next Page
Loading...
