Overheating protection
Each burner is equipped with a
temperature limiter. This limiter turns off
the heating elements in the burner
before the ceramic surface becomes
too hot. Once the ceramic surface has
cooled to a safe temperature the
heating elements will automatically turn
back on.
The overheating protection may be
activated by:
–
turning on a burner without putting a
pan on it.
– heating an empty pan.
– an uneven pan not sitting evenly on
the burner.
– the pan not conducting heat
properly.
If the heating elements cycle on and
off, even at the highest setting, the
overheating protection has been
activated.
Safety features
24
To Next Page
Loading...
