Installing the cooktop
^
Feed the power cord down through
the cut-out and connect the
appliance to the power supply.
^
Position the cooktop on the spring
clips, a.
^
Then with a hand on each side of the
cooktop press down evenly on the
edges until it clicks into position.
When doing so make sure that the
cooktop seal sits tightly on the
countertop to ensure it is sealed
correctly.
The cooktop can now only be
removed with a special tool.
^ Connect the cooktop to the main
power supply.
^ Turn the cooktop on and check the
function.
Wooden countertop
Granite countertops
Installation
38
To Next Page
Loading...
