To Next Page
K
Kevin MitchellSep 12, 2025
What does FE 44 mean on my Miele KM 6344?
- RroberttaylorSep 12, 2025
If you are getting fault message FE 44 on your Miele cooktop, it indicates that the overheat protection was triggered.
What does FE 44 mean on my Miele KM 6344?
If you are getting fault message FE 44 on your Miele cooktop, it indicates that the overheat protection was triggered.
What do other FE fault messages mean on my Miele KM 6344?
If you are seeing other fault messages FE.. on your Miele cooktop, there might be a fault in the electronics. Interrupt the power supply for about 1 minute. If the problem continues after reconnecting, contact Miele Customer Service.
Overview of cooktop models, control panel elements, sensors, and indicator lights.
Specifications for cooking zones, power ratings, and special accessories.
Defines proper usage, prohibited uses, and user capability requirements for safety.
Safety measures for children, preventing suffocation, burns, and scalding.
Guidelines for safe installation, electrical grounding, and appliance handling.
Safe cooking practices, fire prevention, and handling of hot surfaces and flammable materials.
Instructions for initial cleaning and important notes regarding first-time operation and potential odors.
Explains the induction heating principle and details suitable and unsuitable cookware types.
Describes potential noises during operation and their causes, such as humming or crackling.
Explains how to operate the cooktop using sensors and the functions of the control panel.
Details power level settings for cooking and how to activate the auto heat-up function.
Explains the booster function for rapid heating and the keeping warm setting.
Instructions for switching off cooking zones and the cooktop, and understanding residual heat indicators.
Instructions for setting and using the minute minder function for timed cooking.
How to program cooking zones to switch off automatically after a set time.
Guidance on using the minute minder and automatic shut-off functions simultaneously.
Explains how to activate and deactivate the safety lock and system lock for child protection.
Details the Stop and Go feature and the safety switch-off function for extended cooking times.
Describes the overheat protection measures and how sensor coverage affects operation.
Recommends suitable cleaning agents and methods for the cooktop surface.
Guidance on removing stubborn stains, lime deposits, and preventing surface damage.
Instructions for changing programming settings, such as tones and lock modes.
Solutions for common issues like power failure, heating problems, and error messages.
Information on setting up Miele@home and Con@ctivity for smart appliance integration.
Details on suitable cookware and recommended cleaning products for the cooktop.
Specifies required clearances above, below, and around the cooktop for safe installation.
Instructions for preparing the countertop cut-out and fitting the cooktop securely.
Details on connecting the cooktop to the electrical supply, including wiring and grounding.
Provides detailed installation dimensions and diagrams for KM 6310 and KM 6344 models.
Guidance on contacting Miele Technical Service and providing necessary appliance information.
General
