Additional functions
40
Wipe protection
The hob sensors can be locked for
20s in order, for example, to remove
soiling. The is not locked.
Activating
Touch the sensor.
The time will count down in the timer
display.
Deactivating
Touch the sensor until the timer
display goes out.
Demonstration/showroom
mode
These functions enable the hob to be
demonstrated in showrooms without
heating up.
Activating/deactivating demonstra-
tion mode
When this mode is set, the hob can be
operated as normal.
Switch the hob on.
Place an induction-compatible pan
on the hob.
Touch and hold the 0 and 2sensor
controls on the numerical display at
the same time for 6seconds.
In the timer display, flashes altern-
ately with (demonstration mode ac-
tivated) or (demonstration mode de-
activated) for a few seconds.
Activating/deactivating showroom
mode
In showroom mode, cooking pro-
cesses are simulated in an infinite
loop. The sequence of the individual
steps is repeated after 1minute. When
you touch a sensor control or place
pans on the hob, it switches to
demonstration mode.
Switch the hob on.
Place an induction-compatible pan
on the hob.
Touch and hold the 0 and 8sensor
controls on the numerical display at
the same time for 6seconds.
In the timer display, flashes altern-
ately with (showroom mode activ-
ated) or (showroom mode deactiv-
ated) for a few seconds.
To Next Page
Loading...
