Do not leave the appliance unattended whilst it is being
used.
Switching the cooktop on
^
Touch the s sensor.
"0" appears in each of the cooking zone displays and "00"
appears in the timer display. If no further entry is made, the
cooktop will switch itself off after a few seconds for safety
reasons.
Activating a cooking zone
^
Touch the display of the desired cooking zone.
"0" will begin to flash.
Selecting the power setting
^ Touch the appropriate number on the numerical keypad.
The power setting selected flashes in the display for a few
seconds to start with and then lights up constantly.
Changing the power setting
^
Touch the display of the desired cooking zone.
The selected power setting will flash in the display.
^
Touch the appropriate number on the numerical keypad.
If there is only one cooking zone being used, you can set
or adjust the power setting without activating the cooking
zone first.
Operation
25