The cooking cooktop has to be switched on if you wish to use
the timer.
The timer can be used for two different functions:
–
to set the minute minder
–
to set a cooking zone to switch off automatically
A duration of between 1 minute (01) and 99 minutes (99) can
be set.
When the set time has elapsed, "00" will appear in the timer
display and an audible tone will sound for a few seconds.
Minute minder
Setting the minute minder
Example: You want to set a time of 15 minutes.
^ Switch the cooktop on.
^ Touch the timer display.
The "0" on the right and the indicator light for the minute
minder will start to flash.
First the tens digit is set then the units digit.
^ Touch the number on the numerical keypad which
corresponds to the tens position (1 in this case).
The timer display will change and "1" will start flashing.
^
Touch the number on the numerical keypad which
corresponds to the units position (5 in this case).
The timer display will change. The 1 moves to the left and 5
appears on the right.
The minute minder time will begin to count down.
After the minute minder time has elapsed, a tone will sound
and "00" will appear in the display.
Changing the minute minder
^
Touch the timer display.
^
Set a new minute minder time, as described above.
Deleting the minute minder
^
Touch the timer display until "00" appears.
Timer
34
To Next Page
Loading...
Need help?
General
